LOL! The hammer spring is oriented backwards in their own photo.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
LOL! The hammer spring is oriented backwards in their own photo.
We shall see.I'd almost bet money that the prior owner tried to polish it and ruined the disconnecter.
Either that, or its just a POS. OR the lower is out of spec...We shall see.
Not directed at you OP, but the seller. Some people should not be allowed to work on guns!!!!
Wallace's that guide is awesome man!Use this if you have never assembled one before.
http://www.theoutdoorstrader.com/threads/ar15-lower-receiver-assembly-guide.1167622/#post-5923458
ThanksWallace's that guide is awesome man!
Thanks
Yes, FCG is out of spec. It allows the safety to be on without the hammer cocked blocking it and thusly the carrier. This is due in part of either an out is spec safety tang or the fact that the trigger/hammer pin holes are way too large when I measured them...maybe both.Ever figure this out?
Yes, FCG is out of spec. It allows the safety to be on without the hammer cocked blocking it and thusly the carrier. This is due in part of either an out is spec safety tang or the fact that the trigger/hammer pin holes are way too large when I measured them...maybe both.
I emailed JARD and have an RA for the FCG. Have yet to have a chance to mail it back for a replacement. Just sitting on my bench in an envelope ready to go out. :-/
I promised alleycat a write up in this FCG once the new one comes back. I will explain the problem more in depth then. First impression of the trigger is not looking good though...