• ODT Gun Show this Saturday! - Click here for info and tickets!

Sierra 168 match 308 & Varget

Here's a pic of a ladder test I ran looking for accuracy nodes a while back using Varget with 168Gr A Maxs and 168gr Nosler custom competitions in 5 shot strings. The charge weight for each string is on the target.
My Remington 700BDL Varmint stainless fluted 26" 1-12 twist seems to have hit a node at 46Gr (getting hot and full case so work up). It gives me a good place to start refining for that rifle anyway.
Funny thing is just for giggles I tried the A max load in my Savage model 10PC with a 20" 1-10 twist and it put 5 into 1 hole that looked like someone poked it in there with a pencil. So much for load development for that rifle. Too Easy.
I haven't had much luck with Hornady bullets in the past but the A max and V max really shine in a couple of my .308s and 22-250s
I have several 30 calibers that prefer the Sierra bullets but have had better luck with the Gameking HPBTs being more accurate than the match kings. Something about the ogive.
Your mileage may and probably will vary
Good luck and be safe.
 
Last edited:
I don't like to quote numbers, but ngcsugrad09 has posted where my best loads are usually found too.

Experiment with seating depth and the dividends will come.
 
There was a lot of difference in my hodgden manual and my sierra manual so I split the difference and am going to shoot 42 and 42.5 today.Sounds like I am under charged.Thanks for the feedback.
 
My M700 ADL Varmint 26" loves 44.4gr seated .002 off the lands....

18APR132_zps4e310ba1.jpg
 
Here is a couple of groups for you. These was not shot with Varget, my gun hated it.
This load is with H4895, so don't settle for just 1 powder because everybody else says use it. Try several...

100yds 5 shots
IMG_20130530_130054_709.jpg

300 yds 5 shots
IMG_20130530_130432_450.jpg.
 
Here is a couple of groups for you. These was not shot with Varget, my gun hated it.
This load is with H4895, so don't settle for just 1 powder because everybody else says use it. Try several...

100yds 5 shots
View attachment 196613

300 yds 5 shots
View attachment 196614.
Not just trying varget,got some good loads with 4064 and IMR4895 are these loads seated to standard length?Tried 42 and 42.5 of varget today and didn't hit the sweet mark,but I am just getting started.
 
Back
Top Bottom