Stock looks redone? Is it?The adoption fee was extremely reasonable so I felt compelled to bring this 1998 home with me today.
View attachment 3727169
Looks kind of shiny... But awesome!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Stock looks redone? Is it?The adoption fee was extremely reasonable so I felt compelled to bring this 1998 home with me today.
View attachment 3727169
Yes I am certain that it has been. Just a coat of poly I think. There have also been two holes filled on the other side where someone mounted sling studs on the side of the stock for some crazy reason. That's my guess anyway.Stock looks redone? Is it?
Looks kind of shiny... But awesome!
This is an 18 and 1/2-in barrel so I may swap out and put this in the long nose chassis. I have a SBX barrel that may look good in this shorter chassis.Order an extended rail from PMACA and replace the little short rail. That will move the AFG forward a bit and balance the whole thing out.
What am I missing?? How do they walk out if in the stock?? I have replaced a few of mine with the oversized SS pins.. Not because I have had issues with walking but more to provide a nice firm non wiggle fit..Has anybody had any problems with trigger pins walking out of their Ruger BX trigger groups... I have one that is continuously walking out of the right side of the housing about every 50 shots or so... makes the rifle a single shot every time....
DJDMy other 10/22
M4 type stock --it's a Knoxx Blackhawk.
Has 3.75" of range between fully tucked- in and fully extended.
Barrel is very old and worn original Ruger barrel, which has been cut and an M-16 birdcage welded on permanently for a length of 16.25". Welding ruined the bluing so I spray-painted the end.
OAL of rifle is 34 inches with the stock fully extended or 30 1/4 with the stock collapsed.
Weight is 4.5 lbs with TASCO red dot optic in place, but no magazine.
View attachment 3728894
View attachment 3728895View attachment 3728896
View attachment 3728896