Remington model 11 bead

[CAMSDADDY]

I have a 12 gauge Remington model 11. I recently had it refinished and the guy didn’t replace the front bead. I have meant to do it and dove season slipped up on me (i know same time every year but school work death in family was distracting). I was going to order a bead but the larger ones are 6/48 thread and the sight on this gun is not threaded. I’m guessing it’s press in. ID aid hole is .148. I’m wondering if anyone has idea, part number or sight I can have here by Saturday.

 

[BLIP]

by Sat for sure? use a water soluble adhesive and drop a ball bearing or a bb on it. I am not kidding.

 

[BLIP]

or.....
diameter of the bead is .088" and is about .062" tall above the tapered body. The taper starts at .079" and goes to .089" and is .125"

Lyman Shotgun Middle Bead Sight #11 Press Fit Ivory

Lyman shotgun sights are equipped with oversized ivory-like beads, which are easy to see under any light conditions and can be fitted in minutes. Number...

www.midwayusa.com

 

[BLIP]

start here.

 

[CAMSDADDY]

Definitely considering BB. Looked into #10 Lyman but wasn’t sure about transit. I would just shoot my 20ga model 11 but shooting the 12 so my son can have more 20 shells.