If you were me and I were you, I would chuck an empty case in the press. take the seater die cap completely out along with removing the die from the press. send the empty casing up. Then take your die that is taken apart and screw in untilresistance is met. Give it 1/4 more turn. Now re install your cap on your seater die to adjust bullet depth.
Your die is going to crimp the case, and your adj cap is going to control depth. Also expand or champher case mouths with the champher tool or the powder through expander die.
Your die is going to crimp the case, and your adj cap is going to control depth. Also expand or champher case mouths with the champher tool or the powder through expander die.
Last edited: