I have a perfectly good cell phone. Everything works perfectly the camera takes excellent pics but the charging port pins all broke off and I couldn't get it to charge. I called around to a couple of cell phone repair shops and they wanted $100 to over $100 to repair the little charging port. So I got online and found the charging ports for 10 bucks which are supposed to show up today. It's these phones are not like the old ones where they just slide the back off you have to heat it up with the heating gun and melt the adhesive and then pry the back off. A little bit of a time consuming process but not that big of a deal. Then take off the small cover on the lower part of it with four screws and unplugged two little connections. Then two screws hold the charging port in. Then the little charging port board snaps right out. So a little time with the heat gun and $10 and my $400 cell phone is repaired. Some of the repairs on some of these electrical items are so freaking crazy for what little bit of work there is it's insane. You can see the heat activated adhesive around the perimeter of the phone. Once I put the charging port in and replace the cover just have to heat it up again and slap together. PROBLEM SOLVED! And only 10 bucks I might add.