Poor Boy Deer Feeder

[JSoko]

here's my Poor Boy Deer Feeder


mine are 4 inch PVC pipe wired or screwed to tree
I found that wire dont hold up long cause the Bucks antlers tend to break the small wire I use; I screw it to the tree top & bottom
drill a small hole on the tree side just big enough to get the screw through, then a bigger hole on the otherside large enough to get the screw & screwdriver through, then attach to tree


a small V notch in cut at the bottom to let corn out, the rest is done by gravity and the Deers tongue & hoof; be sure to cover the top so rain dont get in


here's the pic and an added one of the feeder in action taken by my Trail Camera


you can see where I had wire and you can also see the hole for screw


IF YOU HAVE OTHER IDEAS POST THEM UP

here's the Trail camera shot, you can see a small Buck in the back

below are a couple that showed up yesterday morning

 

[Vincent Vega]

That looks a lot like the setup I use. I attach the pipe to the tree by using two or three of the 24" or 36" heavy duty zip ties.