I've got a zenith barreled mp5 receiver and fcg group. I bought this thinking I wanted to build an SD out of it but just been so busy I haven't had time nor do I see myself doing it anytime soon. It needs a bolt and carrier which you can get from rcm for ~380. It also needs a paddle mag release if you want it, they are easy to install and fairly cheap from zenith. If you want to make it an SBR it will need a stock otherwise a you can make it into a pistol via a butt cap.
Tldr:
Needs
bolt and carrier- look at RCM-$380
Butt cap or stock if you form1-$25 on zenith
Paddle release if desired, has internal parts, literally only needs the paddle-~$20
Not looking for trades but will always hear ya out. Is on my FFl books so will need to do a 4473.
Tldr:
Needs
bolt and carrier- look at RCM-$380
Butt cap or stock if you form1-$25 on zenith
Paddle release if desired, has internal parts, literally only needs the paddle-~$20
Not looking for trades but will always hear ya out. Is on my FFl books so will need to do a 4473.