Hey gents so i have a bunch of LWRC cold hammer forged ar15 barrels. They are 5.56 nato with a 1-7 twist rate and NiCorr coated. I have them in lengths 8.5, 10.5, 14.5 and 16”. Most are medium profile. Some are thin gov profile mostly in the 12.5” barrels though. I also have some 6.8 spc barrels in the same lengths and those are 1-10 twist. Some are used and some are new. The used ones were replaced due to bad piston gas blocks or were over gassed. They are/were pin on style gas blocks. You can replace them with standard pin on or clamp on style direct impingement adjustable gas blocks to run on any style ar15. Selling them at 120each. You will not find these kind of cold hammer forged barrels or anything LWRC related this cheap. Even bear creak aresenal barrels are over $100-120 now. The bore is bright and crisp on all of them. They have storage marks on them but you can tell many have never been fired. I can ship them but its gonna be $19 for shipping though or meet near loganville. The pic with cardboard says 6.8 but that is just a representation of the barrel lengths and styles