Good Afternoon, I like to load 9mm but have yet to find a good recipe for 9mm Subsonics. Any suggestions?
9mm Subsonic
- Thread starter Jackspack
- Start date
- Status
Load any 147gr and it will be subsonic.
Which powder, bro? And how much?
Any powder will do. I have yet to see a 147 gr in 9mm, non +p, that goes over the speed of sound. Do you have a load manual?
I used Ramshot True Blue at 5.0 grains under 147gr XTPs. Runs about 990fps
Titegroup and any 147 I use Barry's or if through a can Precision Delta bullets http://precisiondelta.com/index.php/products/bullet/9mm/bullets-9mm-147-fmj-tc.html
loaded and shot a few thousand with no issues
Berry s 147 is my 9mm bullet of choice for shooting plate
loaded and shot a few thousand with no issues
Berry s 147 is my 9mm bullet of choice for shooting plate
Yep!
Caution with the powders although suitable ones will all work, the faster burn rates will stress the brass a lot more in 147 grain loads.
I have used Win 231, Accurate #2, #5, and #7. Suppressed use I would not use #2 or probably 231. For suppressed/sub sonic target loads use I use 124 grain FMJ and lead cast or 147 grain lead cast and most often grab AA #5 or #7 to reduce brass fatigue.
Last edited:
I've been using 3.7 of unique with berrys 147s 1.13 OAL. If I was running a can it might be alittle dirty for that, but I haven't had any problems with it at all
*Published in Lymans 49th edition
*Published in Lymans 49th edition
Last edited:
This ain't the place to get load data. No forum is.
Stick with published data.
Stick with published data.
- Status
