So, here is a bracket that I made for my RCBS powder measure. I made it because I am always wishing it was closer to me when I am using the Dillon as more of a turret press than as a progressive.
Other than the labor of bending and drilling the steel, there was not much cost involved:
1/8x1.5 inch mild steel from Home Depot
2 each 3.5 inch bolts to replace the 3.0 inch factory bolts. 1/4x20
2 each 1/4x20 nuts and washers
Other than the labor of bending and drilling the steel, there was not much cost involved:
1/8x1.5 inch mild steel from Home Depot
2 each 3.5 inch bolts to replace the 3.0 inch factory bolts. 1/4x20
2 each 1/4x20 nuts and washers