I found that out years later.Put some poop steel wool on your cleaning rod add solvent and spin it in the chamber. Most malfunctions are caused by a dirty chamber.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I found that out years later.Put some poop steel wool on your cleaning rod add solvent and spin it in the chamber. Most malfunctions are caused by a dirty chamber.
it wasTry firing it without the mag installed….see if it ejects.
It could be an extractor issue
I would make sure that it’s clean and lubed. Maybe try a new mag. Not a lot you can do with a 742 Jam-Master.
It's get one every time I clean it now -- A very good cleaningYep. Blow out and clean the piston with forced air..this area hardly erea never receives a theral cleaning.
Chamber needs polishing out.My automatic 742 is not functioning properly. It will not extract and replace with new shell. I have replaced with new parts and same outcome. I’m bumfuzzelled. And no factory to sent it to. Gunsmith has examined with no success.