• ODT Gun Show & Swap Meet - May 4, 2024! - Click here for info

Need a 30" x 30" x 30" all weather enclosure for my Generator

Ended up with this Deck box, cut and mounted a louvered air entry and a louvered 12" fan on the exhaust side. Will be trimming the shrub a bit more....

1.jpg
2.jpg
 
I don't think I would want to run my ginny in that little plastic box. Maybe cut the bottom out and tip it over or lift off when needed.

Lots of guys on Pintrest have done this mod, temps stay under 120 with the fan running. 1200 CFM pulls plenty of fresh air and exhausts the heat. The top props up about 3 feet, so I can do that in the summer, or open the front doors.
 
I use a very large doghouse tha splits in half for cleaning. Wrap gen up in tarp and cover it up good.
When need arises, take top half off, unwrap, fill and crank.
Mine only gets used once a year, if that, but stays maintained and started once a month.
After start i run dry and wrap up. Usually keep 5 gal gas next to it rotated out every month.
 
Back
Top Bottom