• ODT Gun Show & Swap Meet - May 4, 2024! - Click here for info

lights for dillon 550?

reloading innovations Starlight
https://reloadinginnovations.com/products/starlight-press-lighting-system-for-dillon-550

Inline Fabrications Skylight
https://inlinefabrication.com/produ...ng-kit-for-the-dillon-550?variant=25369913480

Those are in order of recommendation. The only problem with the reloading innovations starlight is that you have to buy a light module for each tool head. It is a very bright clean white light and that one is my recommendation. the unit is 32.95 and two additional light modules are 46.95. If you get the inline one, order the splitter and extra LED strip. It mounts on the press and you only have to buy it once. It is 39.00.

I bought a flashlight that fits in the tool head hole but found it was dim and I always left it on, killing the batteries. This one is 24.95 from uniquetek and is rechargeable:

https://uniquetek.com/product/T1731

Hope this helps, I still recommend the Starlight because all the light is straight down, toward the tool head, which is what you want to see.
 
I have the inline fabrication for a 750. Light straight down from the hole and some sideways from the arm.

20210222_043301.jpg


20210222_043253.jpg
 
Hope this helps, I still recommend the Starlight because all the light is straight down, toward the tool head, which is what you want to see.[/QUOTE]

Just ordered a Starlight for my 550, thanks for the link man.
 
+1 on the LED sewing lights. I use them all over the shop. I have them on most all of my dillons as well as the lathe and mill. Very versatile
 
I got a two led light set off of ebay 8 years ago. Plugs into 110v has one light that goes down from the unused center hole of the tool head and a second light bar that mounts on the press. Shop around you will find one that you like. Also you can get a led shop light cheap these day and hang it over the press area for more over all light.
 
Back
Top Bottom