Item has been relisted, you can find the new listing at: https://www.theoutdoorstrader.com/t...ower-mag-well-ch-safety-lever-td-pin.2533652/
Item Name: FS Parts for CZ BREN 805 S1 & Scorpion Rifle/Pistol, Receiver Mag Well Grip CH Safety Lever TD Pin
Location: CANTON
Zip Code: 30115
Item is for: Sale Only
Sale Price: $10~$200
Caliber: .223 / 5.56 Nato
Willing to Ship: No
Bill of Sale Required?: No
Item Description: I have several new misc parts for a CZ BREN 805 S1 Rifle or Pistol and Grip for Scorpion EVO III. Below I added some additional description that I found. Also the prices I have in parenthesis are new, list prices and are just for reference. Please make offers; doesn't have to be covid prices but reasonable offers. I would love to sale as a whole package and would make a great deal if someone wants to purchase all or most.
I have as follows:
1) New Factory/OEM Lower Receiver & Magazine Well assemblies in black. ($323.40 & $250.50)
2) Manticore Arms ambiguous billet safety levers. Part No.: MA-23400. Was installed then removed, never taken to range ($33.95)
3) New KNS Precision - Bent Enhanced Charging Handle – Waffle Pattern. Part No.: CZBREN-BSCH-WF ($45.00)
4) New KNS Precision - Push-Button Take Down Pin SKU: CZBREN-PB-TD COMBO PAIR ($42.00)
5) Pistol Grip - Yeti Wurks Switchback Grip for CZ Scorpion Evo 3, SKU: switchbv3.1 ($49.99)
New OEM Lower Receiver & MAG Well:
These are new factory CZ parts for the Bren 805 S1 both rifles and pistols. Lower Receiver and Mag Well assemblies. The lower receiver has the back strap installed and the Mag Well has the mag latch and ambiguous mag release installed. Selling as a set.
Manticore Arms ambiguous billet safety levers.
MANTICORE ARMS
BREN 805 SAFETY
SKU: MA-23400
With smoothed out edges and profile and a slightly longer length to reduce the force needed to operate, the Bren 805 Enhanced Safety makes it just that much better to run your Bren 805. Made of 6061 aluminum and black anodized right here in the USA, The Bren 805 Enhanced safety is available for both the left and right hand sides of the gun (each side of the Bren 805 uses a slightly different assembly).
Please note that due to the inherent design of the Bren 805 trigger mechanism and safety lever shaft the installation can take a little time and patience but the end result will totally be worth the effort.
Material: 6061 aluminum
Finish: Type III milspec black anodizing
Weight: 0.2 ounces
Length: N/A
100% designed and manufactured in the USA
KNS Precision - Bent Enhanced Charging Handle – Waffle Pattern
Part No.: CZBREN-BSCH-WF ($45.00)
This CZ Bren 805 charging handle measures out ad 1/2″ longer than our original charging handle with a 20º bend angle in it. The Enhanced Bren 805 Charging Handle provides a much larger & more stable grip surface than the stock charging handle. Designed to rotate freely about the charging post or to be fixed in place (w/provided hardware), the Enhanced Bren 805 Charging Handle is a must-have!
KNS Precision - Push-Button Take Down Pin
SKU: CZBREN-PB-TD COMBO PAIR ($42.00)
Description
The CZ Bren 805 Push Button Take Down Pin simplifies the disassembly process for the cleaning & maintenance of your CZ Bren 805 rifle or pistol. Our push button pins feature a spring-loaded detent system similar to our push button take down and pivot pins for the AR15 platform and do a great job of saving your thumb and fingertips from the sharp wire edges of the original factory pin.
Our CZ Bren 805 Push Button Take Down Pin retracts the locking detent balls with a simple push of the button. Once the button is depressed the user pushes the pin out of the firearm from the side opposite of the release button. Push Button Pin is enclosed with a pressed-in end cap to prevent dirt & debris from accumulating inside the pin. Detent balls & center pin are made of stainless steel, take down pin housing and button are black nitride-treated steel.
Available individually or as a combination 2-pack.
Exact pin diameter: .234″ – These pins are run to a nominal dimension.
-Makes disassembly and cleaning easy
-Designed to eliminate wear to the receiver
-Eliminates some drilling on 80% lowers
-Black Nitride Finish
Yeti Wurks Switchback Grip for CZ Scorpion EVO 3
SKU: switchbv3.1 ($49.99)
Description:
Gen 3 Switchback grips are here!! These have a chamfer around the new reinforced nut. Now all available grip generations will allow the lower to be removed with the grip installed fully forward!!
Are you tired of trying to decide what grip is better for your CZ Scorpion: the Everest or the Matterhorn? Are you sick and tired of not being able to store snacks somewhere on your weapon? Are you tired of selector rub on your trigger finger? Here is the solution to your problems! Say hello to the Yeti Wurks Switchback Grip!
It has a modern modular design. It features swappable back straps, a storage compartment, and a little Yeti Wurks magic. It comes with both Everest and Matterhorn style back straps. It retains the same more vertical than stock grip angle that the previous grips had. The Switchback was designed and made here in the US (counts towards 922r) and is injection molded out of fiber reinforced polymer.
If you only do one upgrade to your CZ Scorpion Evo III Pistol or Carbine this is the one you want!
Weight 6 oz
Pictures:
Item Name: FS Parts for CZ BREN 805 S1 & Scorpion Rifle/Pistol, Receiver Mag Well Grip CH Safety Lever TD Pin
Location: CANTON
Zip Code: 30115
Item is for: Sale Only
Sale Price: $10~$200
Caliber: .223 / 5.56 Nato
Willing to Ship: No
Bill of Sale Required?: No
Item Description: I have several new misc parts for a CZ BREN 805 S1 Rifle or Pistol and Grip for Scorpion EVO III. Below I added some additional description that I found. Also the prices I have in parenthesis are new, list prices and are just for reference. Please make offers; doesn't have to be covid prices but reasonable offers. I would love to sale as a whole package and would make a great deal if someone wants to purchase all or most.
I have as follows:
1) New Factory/OEM Lower Receiver & Magazine Well assemblies in black. ($323.40 & $250.50)
2) Manticore Arms ambiguous billet safety levers. Part No.: MA-23400. Was installed then removed, never taken to range ($33.95)
3) New KNS Precision - Bent Enhanced Charging Handle – Waffle Pattern. Part No.: CZBREN-BSCH-WF ($45.00)
4) New KNS Precision - Push-Button Take Down Pin SKU: CZBREN-PB-TD COMBO PAIR ($42.00)
5) Pistol Grip - Yeti Wurks Switchback Grip for CZ Scorpion Evo 3, SKU: switchbv3.1 ($49.99)
New OEM Lower Receiver & MAG Well:
These are new factory CZ parts for the Bren 805 S1 both rifles and pistols. Lower Receiver and Mag Well assemblies. The lower receiver has the back strap installed and the Mag Well has the mag latch and ambiguous mag release installed. Selling as a set.
Manticore Arms ambiguous billet safety levers.
MANTICORE ARMS
BREN 805 SAFETY
SKU: MA-23400
With smoothed out edges and profile and a slightly longer length to reduce the force needed to operate, the Bren 805 Enhanced Safety makes it just that much better to run your Bren 805. Made of 6061 aluminum and black anodized right here in the USA, The Bren 805 Enhanced safety is available for both the left and right hand sides of the gun (each side of the Bren 805 uses a slightly different assembly).
Please note that due to the inherent design of the Bren 805 trigger mechanism and safety lever shaft the installation can take a little time and patience but the end result will totally be worth the effort.
Material: 6061 aluminum
Finish: Type III milspec black anodizing
Weight: 0.2 ounces
Length: N/A
100% designed and manufactured in the USA
KNS Precision - Bent Enhanced Charging Handle – Waffle Pattern
Part No.: CZBREN-BSCH-WF ($45.00)
This CZ Bren 805 charging handle measures out ad 1/2″ longer than our original charging handle with a 20º bend angle in it. The Enhanced Bren 805 Charging Handle provides a much larger & more stable grip surface than the stock charging handle. Designed to rotate freely about the charging post or to be fixed in place (w/provided hardware), the Enhanced Bren 805 Charging Handle is a must-have!
KNS Precision - Push-Button Take Down Pin
SKU: CZBREN-PB-TD COMBO PAIR ($42.00)
Description
The CZ Bren 805 Push Button Take Down Pin simplifies the disassembly process for the cleaning & maintenance of your CZ Bren 805 rifle or pistol. Our push button pins feature a spring-loaded detent system similar to our push button take down and pivot pins for the AR15 platform and do a great job of saving your thumb and fingertips from the sharp wire edges of the original factory pin.
Our CZ Bren 805 Push Button Take Down Pin retracts the locking detent balls with a simple push of the button. Once the button is depressed the user pushes the pin out of the firearm from the side opposite of the release button. Push Button Pin is enclosed with a pressed-in end cap to prevent dirt & debris from accumulating inside the pin. Detent balls & center pin are made of stainless steel, take down pin housing and button are black nitride-treated steel.
Available individually or as a combination 2-pack.
Exact pin diameter: .234″ – These pins are run to a nominal dimension.
-Makes disassembly and cleaning easy
-Designed to eliminate wear to the receiver
-Eliminates some drilling on 80% lowers
-Black Nitride Finish
Yeti Wurks Switchback Grip for CZ Scorpion EVO 3
SKU: switchbv3.1 ($49.99)
Description:
Gen 3 Switchback grips are here!! These have a chamfer around the new reinforced nut. Now all available grip generations will allow the lower to be removed with the grip installed fully forward!!
Are you tired of trying to decide what grip is better for your CZ Scorpion: the Everest or the Matterhorn? Are you sick and tired of not being able to store snacks somewhere on your weapon? Are you tired of selector rub on your trigger finger? Here is the solution to your problems! Say hello to the Yeti Wurks Switchback Grip!
It has a modern modular design. It features swappable back straps, a storage compartment, and a little Yeti Wurks magic. It comes with both Everest and Matterhorn style back straps. It retains the same more vertical than stock grip angle that the previous grips had. The Switchback was designed and made here in the US (counts towards 922r) and is injection molded out of fiber reinforced polymer.
If you only do one upgrade to your CZ Scorpion Evo III Pistol or Carbine this is the one you want!
Weight 6 oz
Pictures:
