Here is a Colt M4 Carbine (cr6920) with a low serial number (CR005xxx). I was told it was an early "CR" model made with "LE" parts. I can't read the barrel date because it has a KAC free float RAS on it and I do not have the tools to remove it. The laser engravings are whitish in color. I can't say for certain if it was filled in white, or if it's the bare metal showing after being engraved. It looks intentional and I don't think it would have slipped through QC if it was a mistake. I've run multiple mags through it since I've owned it and it runs flawlessly. If you're interested in it I'm free almost anytime. You're also welcome to test fire it, although it would have to be at an indoor range with your ammo (unless you can shoot on your own property).
$1200. Cash only. I'm open to reasonable offers.
Must be 18 or older and have positive feedback.
Specs are below.
Barrel:
16 inch barrel marked "13629 M P 5.56 NATO 1/7"
No M203 flats
Standard A2 flash hider
FSB is "F" marked
Side sling adapter
7 inch Knights Armament free float RAS quad rail. Comes with 5 KAC 11 rib covers, KAC broomstick, and KAC case.
Upper receiver:
Stamped "M4" just behind the delta ring
Removeable carry handle
White T markings
Above the forward assist is marked with cage code "13629" and has square forge mark.
Lower Receiver:
Laser engraved pony, Colt, and "M4 Carbine" etc.
Safety selector is marked "O" "S" for Schmid Tool
Opposite side of selector is flat, no notch pointing to "Fire" or "Safe"
Internals:
Star chamber marked "O" "4"
Bolt is marked "MPC". No "C" marking on the carrier.
Hammer is notched
Hammer is marked with a double "S" for Schmid Tool
H buffer
Stock:
Collapsible waffle stock marked with Colt's cage code "13629"
$1200. Cash only. I'm open to reasonable offers.
Must be 18 or older and have positive feedback.
Specs are below.
Barrel:
16 inch barrel marked "13629 M P 5.56 NATO 1/7"
No M203 flats
Standard A2 flash hider
FSB is "F" marked
Side sling adapter
7 inch Knights Armament free float RAS quad rail. Comes with 5 KAC 11 rib covers, KAC broomstick, and KAC case.
Upper receiver:
Stamped "M4" just behind the delta ring
Removeable carry handle
White T markings
Above the forward assist is marked with cage code "13629" and has square forge mark.
Lower Receiver:
Laser engraved pony, Colt, and "M4 Carbine" etc.
Safety selector is marked "O" "S" for Schmid Tool
Opposite side of selector is flat, no notch pointing to "Fire" or "Safe"
Internals:
Star chamber marked "O" "4"
Bolt is marked "MPC". No "C" marking on the carrier.
Hammer is notched
Hammer is marked with a double "S" for Schmid Tool
H buffer
Stock:
Collapsible waffle stock marked with Colt's cage code "13629"
