• ODT Gun Show & Swap Meet - May 4, 2024! - Click here for info

Help\Advice Stuck casing

DO NOT USE A WOOD DOWEL !!! if it splits and jams you will have a real problem--
A brass rod 3/16 dia -- cut to be about 1 inch sticking out of barrel -
you will be able to wack it good without bending -- steel rod wrapped with tape ok too -
 
Did you try mortaring the rifle? What ammo and rifle? Just curious , I know you said steel case.

It is Tulamma and in a Windham Weaponry non-assault AR-15. I have not tried that yet...Soaked it a couple times and tried the rod. Though it is a very thin rod, have to get a thicker one.
 
THIS IS WHY I LEAVE STEEL CASED AMMO ALONE UNLESS AK OR SKS ! SOMETIMES FREEZING OVERNIGHT THEN HEAT AND DRIVE OUT GET BIGGEST ROD THAT WILL FIT IN BORE ! GO TO HARDWARE STORE AND GET STEEL ROD 4INCHS LONGER THAN YOU NEED AND BE SURE NO ROUGH EDGES !
 
Update.....got it out!

Thank you everyone who threw in some advice, I went to Home Depot and bought a 3/16" steel rod, $3...dripped some oil down the barrel and let it soak a few hours, couple of good taps and it came out.

Thanks D_Max.

Now to clean it up real good and only shoot brass....ha
 
kaboom.jpg
 
Back
Top Bottom