• ODT Gun Show & Swap Meet - May 4, 2024! - Click here for info

Brass Processing

moosensquirrel

Default rank 5000+ posts Supporter
The Hen that laid the Golden Legos
62   0
Joined
Nov 16, 2012
Messages
6,795
Reaction score
7,636
Location
wayne county
I have looked this up, but so far it appears that most processors only want to sell Brass, not process it for others.

I have several thousand 1x brass in 7.62x51 that I would like to have cleaned, swaged, sized, primed*, and trimmed, ready for me to add powder and projectile.

* I can furnish the primers, No problem

Does anyone do this or know of someone that will do this?
 
I have the Dillon trimmer and it would still cost around 157 bucks to get started processing 308.
Large rifle shell plate 41.99
CF Arm Bushing, Rifle, White. 12.99
CF Adapter 30-06, 308, 243, Black -20.99
308 trim die 61.99

all the other parts I need are the same as 45acp which I already have.

plus you would have to handle the brass twice to prime it.

if them guys will do it for 55/1000 I would jump on it.
 
7.62 NATO is the same as 308. You can use the same dies. They are charging $55/1000 to reprocess 308.
one can use the same dies, but they are not necessarily the same: many brands marked as 7.62 have crimped primer pockets and require swaging as one of the steps.

Regardless, thanks to you and others for the link. I have downloaded the form for reprocessing.
 
Back
Top Bottom