-
ODT Gun Show & Swap Meet - May 4, 2024! - Click here for info
Anybody got load data for 165 gr 9mm?
- Thread starter calebp
- Start date
I exclusively shoot xtreme 165gr 9mm in IDPA.
My load data is
165gr Xtreme 9mm
3.0gr n320
Fed small pistol match primer
1.140"coal
165gr xtreme 9mm
2.8gr titegroup
Fed small pistol match primer
1.140"coal
Both loads are hovering around 790-800fps from my wilson match barreled g34. YMMV
My load data is
165gr Xtreme 9mm
3.0gr n320
Fed small pistol match primer
1.140"coal
165gr xtreme 9mm
2.8gr titegroup
Fed small pistol match primer
1.140"coal
Both loads are hovering around 790-800fps from my wilson match barreled g34. YMMV
I will say be very careful and read your primers / brass for signs of pressure. It's a very soft shooting and quiet load but generates a LOT of pressure due to the fast powder and heavy bullet.
The difference is notable for sure. Ran some through a supressed f/a mp5, sounded like a masturbating nun.
I am using 3.0 grains with IMR Red and Red dot, and N320 and sport Pistol, and all those other fast powders, AA#2, etc. HP38 will be slightly more, probably 3.1-3.2. Rule of thumb, you go down ~10-15% from 147 data.
might have to try some of these..
those running Titegroup do you find a lot of blowback with a can on? I shot a variety of loads thru a Ghost the other day (9mm 147gr and 45 230gr JHP) and at least one of the loads with Titegroup was evil to shoot with all the crap being blown back. I don't recall which pistol or load it was but just remember thinking "no more titegroup subs". Could have been some hotter 45ACP loads in the FNX45T.
I've got enough N320 and that's what I've been working on, but somewhere misplaced my G22 9mm threaded conversion barrel so back to just shooting thru a 509t.
those running Titegroup do you find a lot of blowback with a can on? I shot a variety of loads thru a Ghost the other day (9mm 147gr and 45 230gr JHP) and at least one of the loads with Titegroup was evil to shoot with all the crap being blown back. I don't recall which pistol or load it was but just remember thinking "no more titegroup subs". Could have been some hotter 45ACP loads in the FNX45T.
I've got enough N320 and that's what I've been working on, but somewhere misplaced my G22 9mm threaded conversion barrel so back to just shooting thru a 509t.
My advice, Sell the titegroup and don't shoot it suppressed. Unless you want to inhale the dirtiest crap ever, probably equivalent to smoking 10 packs of cigarettes or worse. Super super dirty, and its super bad supressed because titegroup runs alot hotter than many other powders, and supressors don't like heat.
