Any vehicle 2 post lift installers here?

[Comanche]

Do you know who poured the existing slab? I'd be inclined to cut sections and re-pour deep pads just for the lift if its unknown, especially if it is for a bigger lift. Nothing you want to find out with an F250 above your head.

*I put in my own 10k lift, but on a fresh slab I spec'd with 18" footers under the posts.

Absolutely correct. cut the area needed out. Repour with proper PSI “ keyed” into the concrete area around it. My only personal addition is to use 4000psi and give it sufficient cure time before installing lift.

agreed.
Yep we’re well aware this may be the case.
The slab is going to have to be checked and most likely just as described above.
Thanks for the feedback guys!!!