ak47 help needed!!

[at]

Just put a tapco g2 trigger kit in my arsenal sgl-21-76 and after it's said an done the two pins that hold the trigger and hammer in have some lateral movement. Is this normal or do I need to worry.

 

[sovietak474u]

A little movement is fine but if the shepards hook is not locked in to both then the pins will pop out. do you have it on both of the grooves on the pins?

 

[drtybykr]

It's an AK, hit it with a BFH a couple of times, and it will be good to go.

 

[cvpadge]

A little is fine but if that Shepherd's hook isnt in right the trigger group is gonna fall out

 

[at]

A little movement is fine but if the shepards hook is not locked in to both then the pins will pop out. do you have it on both of the grooves on the pins?

I bent the **** out of the hook so I got a tapco retainer plate. Pins will not come out but I like everything PERFECT lol

 

[cvpadge]

I bent the **** out of the hook so I got a tapco retainer plate. Pins will not come out but I like everything PERFECT lol

your fine. the plate wont go on if thet aint in right

 

[sovietak474u]

your fine. the plate wont go on if thet aint in right

exactly.

 

[at]

Cool thanks for the info, didn't want to ruin a 1000 ak over a few loose pins wearing the receiver out.

 

[sovietak474u]

Cool thanks for the info, didn't want to ruin a 1000 ak over a few loose pins wearing the receiver out.

Good thinking. better to be sure. Glad you got it worked out.