.223 Brass Reprocessing Done Right

[moosensquirrel]

$75/1000 including return shipping. The brass looks like new brass. Check out their website. They answer their phone and return calls too.

https://craftedballistics.com/products/223-brass-processing-service

 

[moosensquirrel]

I took a sample of 100 and came up with the following case length dispersion.
all 100 passed the go-no go head-space test.
71 were less than .0005 of the target 2.750 (trimmed .010 from 2.760)
28 were between .001-.002 from target length.
7 were between .002 and .003 (all over target)
1 was mysteriously trimmed .010 under

All brass was

• Pre washed to remove any carbon, stains, mud etc
• Roll sized
  
• De-primed
• Swaged to remove any crimps
• Full length resize
• Neck size w/carbide expander to provide proper neck diameter/concentricity for better neck uniformity, bullet tension and less bullet run out
• Trim, chamfer, deburr case mouth to 1.750 +/- .003
• Final quality control inspection w/ case gauge block to verify correct head space
• Polish

Contact Jonathan Gutierrez at 323-717-7077 or craftedballistics@yahoo.com.

 

[Falcon1]

Interesting